What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 08:37

It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–16 [ OO OLAOYE OYEBODE ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Study shows that early humans climbed trees and worked with stone - Earth.com
Here is a simplified AC power diagram.
What does a fuse do?
He then describes the function of a fuse.
Owen Wilson Brings Clever, Funny “Stick” in Under Par - Roger Ebert
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The third is lightning and “how it gets conducted into a home.”
a photo is worth a thousand words.
but I think this circuit , shows a few more pieces.
Upvotes:
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
One is “what exactly is in a ‘surge protector’ ? ”
What do you think of the Quora group "It's Ok to Be White" for people who are proud of being white?
An AC voltage/ current source, and an ac inductive load.
For this case there are devices called Metal oxide varistors (MOV).
There are two important concepts here.
NYC’s Noisy Skies Get Electric With Beta’s Demo Flight Into JFK - Bloomberg.com
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
nine
The Ocean Is Getting Darker, Threatening All That Lives Within - ScienceAlert
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The bolt then partially travels down the line to your home.
the problem then depends on "how fast does the fuse operate?".
What is your opinion about homosexuality? Do you think that it is by nature or a choice?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But it can get overloaded, and no longer works.
The other is “what does a “fuse” do?”
Stopping alcoholism gets smarter with smartwatches - The Brighter Side of News
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This device then solves the entire problem.
What is lightning?
Marchand nets 2OT winner as Florida evens Finals - ESPN
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A circuit breaker is similar, but is resettable.
This one hit behind the barn.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
How were cows used in ancient India?
This is where the MOV conducts again, and dissipated the energy.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Edit 2024–10.
2024–10–14 [Omar Gharbi Omar Gharbi ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
eight
These are simplified answers to the original question, and does not change anything I wrote above.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
One
I post the exact comment here.
Now when you have a certain ac resistance, then a current flows in a loop.
This is 'the assistant's answer'
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
He then asserts :
It also is a device that limits the change in current flow.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
A fuse is a non-resetable over current circuit protector.
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
First Sentence:
At least they know the answer if they wanted it.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are three different concepts here that are getting confused.
so, what happens?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–10[John johnson John Johnson ]
Because the load is inductive, the current lags the voltage.(by a bit).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These devices are installed between the “hot” and “neutral” and protective ground.
At one ohm, the resistor has a maximum of 1 watt power.
[old diagram got deleted by accident]